Product

Shall be Series 700 Fixed, Open-In Casement and Hopper Window Assemblies, as manufactured by INLINE FIBERGLASS Limited with a frame of 60 mm (2-3/8") and in compliance with AAMA 101/I.S.2 and CAN/CSA-A440.1 and CSA A440.2 standards. Rating [CSA 440- A3/B7/C5] [AAMA- HC 90].

Materials

All frames and sash profiles are made from Pultruded Fiberglass, having a minimum of wall thickness of 0.090" (2.3 mm), with minimum glass content of 60%. Non-structural accessory members are permitted to be in vinyl or aluminum and are identified as such.

Construction

Frame and sash corners are connected with molded reinforced plymer shearblocks and mechanically secured. Joints are factory sealed and neatly fitted together. The perimeter of open-back frames shall be filled with insulation.

Finish

All exposed surfaces are coated with durable lsocynate-free 2 part Polymer Enamel with minimum dry film thickness of 1.5 mils and medium gloss of 25-55. Finish shall resist chipping, blistering, chalking, discoloration and aging under all atmospheric conditions. Conforms to AAMA 603 and 613 Organic Coatings. Standard colours are: White, Ivory, Sandalwood, Commercial Brown and Forest Green. (Custom colours and split frame painting is available.)

Hardware

Concealed Stainless Steel Hingers and metal cam-locks with keepers by "TRUTH Hardware". Hardware is installed through fiberglass substrate and into patented back-up reinforcement. For windows greater than 1220 mm (48") in height, a compression interlock provides a positive seal.

Weather-Stripping

Santoprene Bulb-type air-seal gasket on interior with extruded flexible leaf-type Santoprene "rain screen" gasket on the exterior to provide weather barrier.

Glass

All windows are glazed with 22 mm (7/8") insulating glass units. Glass thickness shall be in accordance with applicable Building Code. The full range of glazing options are available including: colonial grilles, low conductance spacers, inert gas fills and glazing to reduce heat loss, solar heat gain, and visible light transmission.

Glazing Method

Laid-in glazing using polyethylene closed cell tape on the exterior and PVC glass stop locked-in from the interior provides a secure and positive seal for the glass.

Insect Screens

Heavy duty ,full-height, roll-formed aluminum frame with friction fit corner keys. Screen mesh (Fiberglass or Aluminum) retained by vinyl spline.

Installation

Shall be performed by experienced installers in accordance with manufacturer instructions and CSA A-440.4. Window shall be plumbed and square after installation is complete and sealed to both interior and exterior wall with high quality sealant around the perimeter of the frame. If perimeter cavity is to be foamed, additional anchorage may be required to prevent bowing. It shall be the responsibility of the installers to make all the necessary final adjustments to ensure normal and smooth operation.

*Due to constant product improvements, Inline reserves the right to change information herein without notice